The greenteQ Electronic tubular motor for roller shutter elements with 60 mm tube. The clever drive with a fully automatic Plug&Play mode. If the roller shutter encounters an obstacle when closing, this is registered by the motor, which then responds with a STOP. The obstacle is cleared, and the roller shutter, property and personal protection are thereby ensured. The motor also independently deactivates itself if the roller shutter gets stuck in the guide rails due to frost during an open/ close command. Roller shutter damage is thus prevented. Shaft clip connectors are mandatory for the installation of this Plug&Play motor in order to ensure the full functional scope.
Tested and certified by the VDE Institute.
Scope of delivery:
Roller shutter motor, instructions, preassembled adapter set 60 mm and connection cable 2.5 m.
Technical datas
Micro-E
Ultra-E
Mega-E
Rolling tube (mm)
60
60
60
Torque / Tractive Force (Nm)
10
20
40
Connection (V/Hz)
230
230
230
Current (A)
0,49
0,64
0,86
Power (W)
125
180
285
Outside diameter (mm)
45
45
45
Drive length (cm)
59,1
69,1
69,1
Insertion depth (cm)
57,5
67,5
67,5
Weight (kg)
2,03
2,58
2,88
Pulling Power (kg)
18
37
74
Max. tensile load PVC (m2)
5,0
10,5
16,8
Max. tensile load ALU (m2)
3,5
6,9
12,1
Runtime (min)
4
4
4
Limit switch range
∞
∞
∞
Protection class
IP44
IP44
IP44
Description
PU
VBH Item No.
greenteQ Electronic roller shutter motor AS Micro-E
1 piece
217.274 / 7190
greenteQ Electronic roller shutter motor AS Ultra-E
1 piece
217.274 / 7191
greenteQ Electronic roller shutter motor AS Mega-E
;)
;)
;)
;)
