meer informatie

Textured Hybrid

greenteQ Textured Hybrid for indoor and outdoor use: sealing window connection joints (even with ETICS systems), installing window sills and repairing joints and cracks in concrete, masonry and plaster

greenteQ Textured Hybrid is a high-quality, neutral, single-component, elastic sealant with a granular texture based on hybrid polymer.

Product properties:

• Granular texture (rough plaster), matches the surrounding substrate

• Very easy to process, permanently elastic after curing

• Almost completely odourless

• Non-corrosive, waterproof

• Excellent adhesion on almost all substrates, usually without the need for primer

• Adheres to slightly moist substrates

• Free of silicone, solvents, halogens, acids and isocyanates

• Excellent paintability (ideally after curing) with water-based colour systems

• Colour-fast; resistant to weathering and UV

Technical data:

• Basis: 1C hybrid polymer

• Consistency: Stable paste

• Curing: Polymerisation due to air humidity at room temperature

• Curing speed*: 2–3 mm in the first 24 hours

• Skin formation* (23°C/50% R.F.): Approx. 15–20 minutes

• Shore A hardness: 25 +/- 5

• Density**: Approx. 1.55 g/ml

• Max. permissible total deformation: +/- 20%

• Modulus of elasticity 100% in accordance with DIN 53504: 0,50 N/mm²

• Tensile strength in accordance with DIN 53504: 0,60 N/mm²

• Elongation at break in accordance with DIN 53504: 200%

• Temperature resistance: -40°C bis +90°C

• Processing temperature: +5 °C to +40 °C (ambient temperature), +5 °C to +35 °C (adhesive surface temperature

*These values may vary due to environmental factors, such as temperature, humidity and type of substrate. 

**These figures refer to the fully cured product.