meer informatie

Hybrid crystal-clear assembly adhesive

greenteQ Hybrid assembly adhesive is a high-quality, permanently elastic MS polymer-based adhesive and sealant and is crystal-clear.

High-quality, permanently elastic adhesive and sealant based on a hybrid polymer. For indoor and outdoor bonding applications. Transparent and elastic bonding in common construction applications. Invisible bonding of glass and other transparent materials in indoor applications.

Product properties:

• Excellent adhesion to most surfaces, including when slightly moist.

• Very good mechanical properties.

• Resistant to mould, contains ZnP (biocide with a fungicidal effect).

• Easy to dispense, even at low temperatures.

• Free of isocyanates, solvents, halogens and acids.

• Can be painted over with water-based coating systems.

• Permanently elastic after curing.

Technical data:

• Basis: SMX hybrid polymer

• Consistency: Stable paste

• Curing: Moisture-curing

• Skin formation* (23°C/50% R.F.): Approx. 10 minutes

• Curing time* (23°C/50% R.F.): 2-3 mm / 24 hrs

• Hardness**: 38 ± 5 Shore A

• Density**: 1,07 g/ml

• Recovery capacity (ISO 7389)**: > 75%

• Max. permissible total deformation (ISO 11600): ± 20%

• Tensile strength (ISO 37)**: 2,4 N/mm²

• Modulus of elasticity 100% (ISO 37)**: 0,8 N/mm²

• Elongation at break (ISO 37)**: 300%

• Temperature resistance***: -40°C to +90°C

• Processing temperature: +5°C to +35°C

* These values may vary depending on environmental factors such as temperature, humidity or the type of substrate.

** These fi gures refer to a fully cured product.