Self-adhesive EPDM film for sealing areas of windows and doors in contact with soil, in accordance with the requirements of DIN 18533-1
Irrespective of substrate and together with bonding or mechanical attachment, greenteQ self-adhesive 0.8 mm EPDM film is suitable for single-layer structural sealing for the following applications in accordance with DIN 18533-1:
External seals for base plates, outer wall surfaces and wall splash zones in contact with soil, including in connection with façade systems in the case of ground moisture and water not under pressure, water exposure class W1-E, as per DIN 18533-1:2017-07.
External seals for base plates and outer wall surfaces in contact with soil with water exposure caused by moderate water pressure loads, water exposure class W2.1-E, as per DIN 18533-1:2017-07.
External seals on earth-covered, unfrequented floor areas against ground moisture and non-accumulating seepage water in the case of ground moisture and water not under pressure, water exposure class W1-E, as well as in the case of water exposure caused by moderate water loads, water exposure class W2.1-E, as per DIN 18533-1: 2017-07.
Technical data:
Thickness: 0,8 mm
Thickness tolerance: +/- 20%
Sd value DIN EN ISO 12572: Approx. 16 mm
Tensile strengthEN 12311-2: ≥ 7MPa
Elongation at tension EN12311-2: ≥ 300%
Tear resistance EN12310-2: ≥ 10N
Waterproof at 2 kPa water pressure EN 1928: Requirement fulfilled
Ageing resistance EN 1296/EN1931: Requirement fulfilled
Fire behaviour EN 13501-1: Building material class E
Shelf life: 12 months from date of production (Production date on label)
;)
